Guide · For coaches

The 20 m Shuttle Run (the beep test) for hockey: how it works

The beep test for hockey is the 20 m Shuttle Run: players run between two lines 20 m apart, keeping pace with beeps that speed up every minute. Here’s what it measures, how the levels and the two-miss rule work, how to score it, and how to run a beep test for a team without turning it into a ranking.

By Braden Urquhart, minor hockey coach, founder of PuckStreak and founder of RecTimes · Oct 6, 2026

The 20 m Shuttle Run (beep test) for hockey: how it worksPlays from YouTube. YouTube may set cookies once you press play. Watch on YouTube (opens in a new tab)

What the 20 m Shuttle Run measures

The 20 m Shuttle Run is a test of aerobic fitness: how well a player can keep going as the work gets harder. It comes from the multistage test that Luc Léger and colleagues published in 1988, built for sports with lots of stops and starts. Hockey Canada uses it in its fitness testing.

Why it matters for hockey

A shift is a burst of hard skating, then a rest on the bench, over and over. Hockey Canada’s testing protocols explain that a good aerobic base helps players recover between hard efforts, so they keep their energy through back-to-back shifts, periods and games. The shuttle run’s stops, turns and starts look a lot like the game, too.

For a U11 player, it isn’t about hitting a number. It’s a simple, repeatable way to see their own fitness grow over the season.

It doesn’t measure skating, puck skills or hockey sense. A great skater can have an ordinary shuttle-run score, and that’s fine: it’s one piece of the picture, not a verdict on a player.

How it works: levels, beeps and the two-miss rule

This is the protocol PuckStreak uses, from Hockey Canada’s testing:

  • Two lines, 20 m apart. Players start behind one line.
  • Level 1 starts at 8.5 km/h, an easy jog. Each 20 m shuttle takes about 8½ seconds.
  • Each level lasts about a minute and is 0.5 km/h faster than the one before, so the beeps come closer together. There are 21 levels.
  • Reach the line by each beep. Getting within 1 m of the line in time counts. Then turn and head back.
  • The first miss is a warning. It clears as soon as the runner makes the next line.
  • Two misses in a row end the run.

Each level has a few more shuttles than the last (7 in level 1, 16 by level 21), which keeps every level about a minute long as the pace climbs. A rising triple beep marks each new level.

In PuckStreak

The runner plays the beeps for you, with an optional voice that calls each new level. It can read the rules aloud before the start, then counts everyone in: “Three, two, one, go!” The screen stays awake for the whole run.

Scoring: level · shuttle and total shuttles

A score is the last level a player reached and the shuttles they completed in it, written like Level 9 · shuttle 5. Count only the shuttles completed before the two misses in a row. Hockey Canada scores it the same way, by level and shuttle.

The same score as one number is the total shuttles completed. Level 9 · shuttle 5 is 77 shuttles: 72 in levels 1 to 8, plus 5. Totals make progress easy to see: going from 60 to 77 is 17 more shuttles, whatever the levels.

Don’t turn scores into fitness estimates or compare them with charts by age or sex. Those need details a team doesn’t need to collect, and they aren’t the point. The only comparison that matters is the player’s own last run.

In PuckStreak

Each score is saved as the total and shown as level · shuttle everywhere: the Combine grid, each family’s personal bests and the printed Combine scoresheet. On paper, write 9 · 5 and type it in later as 9.5.

Set it up

  • Space: a gym with a flat, clear run and room past each line. Hockey Canada’s protocol lists a surface of at least 30 m.
  • Measure it: use a tape measure for the 20 m. Don’t pace it out; a short course makes every score look better than it is.
  • Lines and cones: tape both lines, and put a cone at each end so runners can see them.
  • Lanes: give each runner a lane about a big step wide, so nobody bumps at the turns.
  • Sound: a speaker loud enough to hear over running feet, near the middle of the gym.
  • Shoes and water: running shoes, and water bottles well off the course.

In PuckStreak

The sound check plays a test beep so you can set the volume first. In a loud rink, switch on the louder beep under Advanced.

No app? Play the full test here

This is the same audio PuckStreak plays: the spoken rules, a count-in, a beep at the end of every shuttle, and a triple beep with “Level N” at every level change, for all 21 levels (about 22 minutes). Play it through a speaker loud enough for the whole gym, not a phone’s own speaker.

20 m Shuttle Run: all 21 levels22:30
Download the audio (MP3, 11 MB)

In PuckStreak

The app plays the same beeps on the coach’s phone, and you tap a runner after each missed line, so every level and shuttle is saved to your team’s Combine with nothing to write down.

How to run a beep test for a team

It’s hard to watch 17 runners at once. Run the team in waves of 8–10: one wave runs while the other spots and cheers. Each wave takes at most about 22 minutes (all 21 levels), and young players usually finish long before that, so two waves fit easily into a practice slot.

  • One person calls misses. One adult decides every warning and out, so every runner is judged the same way.
  • Spotters at each end point out who didn’t make the line.
  • Tell runners they’re out kindly, and have them walk to the side, clear of the lanes.
  • Record scores right away, before the next wave starts.

In PuckStreak

Each runner is a tile with their jersey number and first name. Tap a tile right after a beep they missed and it turns amber with a “!”: a warning. Tap it again by the next beep and it turns red, OUT, with their level and shuttle. If they make the next line, the warning clears on its own, and a long press undoes a mistake. Check the scores, save them straight to the Combine grid, and Next wave picks the players who haven’t run yet.

How players should pace themselves

  • Start easy. The first levels feel slow on purpose. A relaxed jog saves energy for later.
  • Arrive with the beep, not long before it. Sprinting ahead and waiting wastes energy.
  • Turn sharp. Reach the line, turn and go.
  • Listen for the triple beep. It means the pace just went up.
  • Stay tall and keep breathing as it gets harder.
  • Stopping is fine. Nobody needs to push until they feel sick.

Keep it safe

  • Warm up first: about 10 minutes of easy jogging, skips and leg swings.
  • Water before and after, and a walk to cool down when they’re done.
  • Stop if something’s wrong. A runner who feels pain, dizzy or sick stops right away and sits down, and you let their parent know.
  • Skip it on a bad day. A player who is sick or hurt can run another time.
  • Never use it as punishment. A fitness test should feel like a challenge, not a penalty.

Talk about results the right way

Keep each player’s score between them, their family and the coaches. Don’t read scores out or post a list. Celebrate what the team did together, and each player’s progress against their own best.

  • “You made it two levels further than in September.”
  • “You kept a steady pace the whole way. That’s how you get further next time.”
  • “What do you think helped?” Let them name the work: the bike rides, the other sports, showing up.

In PuckStreak

Scores are seen only by each player’s family and the team’s staff. The results screen celebrates the team instead: the team’s average level, how many runners reached each level band, and “New personal best!” shout-outs by first name, with no numbers.

Retest at mid-season and year-end

Run it at each Combine: Fall (September), Mid-season (January) and Year-end (March). Keep everything the same: the gym, the floor, the shoes, the speaker, a similar time of day and the same person calling misses. Then a higher score means the player really got fitter.

Compete with yourself, win as a team. For the rest of the day’s stations, see how to run a hockey Combine.

Planning the whole day? How to run a hockey Combine for your minor hockey team

Sources

Run the 20 m Shuttle Run with PuckStreak

Set up free. A team’s season is $99 + tax, and families never pay.